speed test

identify drive letter:

sudo fdisk -l|grep Samsung -B 1

test hard drive speeds:

sudo hdparm -Tt /dev/nvme1n1

install iotop to verify io usage:

sudo pacman -Sy iotop --noconfirm

execute iotop as root:

sudo iotop -o

temperature

install nvme-cli tool using pacman:

sudo pacman -Sy nvme-cli

display nmve drive health and temperatures:

sudo nvme smart-log /dev/nvme0

or install smartmontools:

sudo pacman -S smartmontools --noconfirm

use smartmontools to show nvme health and temperatures:

sudo smartctl -a /dev/nvme0

first, unmount any filesystem mounted on the drive or if it’s your boot drive, you would need to boot using a livecd.

navigate to https://bit.ly/3nB8vXb in firmware find your drive model and download the iso:

wget https://download.semiconductor.samsung.com/resources/software-resources/Samsung_SSD_990_PRO_1B2QJXD7.iso

mount the iso:

mkdir /mnt/iso
mount -o loop Samsung_SSD_990_PRO_1B2QJXD7.iso /mnt/iso

decompress initrd on temp directory:

mkdir /tmp/samsung 
cd /tmp/samsung
gzip -dc /mnt/iso/initrd | cpio -idv --no-absolute-filenames

enter the following directory and execute fumagician:

cd /tmp/samsung/root/fumagician
./fumagician

first identify the drive letter:

fdisk -l|grep Samsung -B 1

next create the new partitions on drive using parted:

parted /dev/nvme0n1

inside parted create the partition table as gpt then boot and root partitions:

mklabel gpt
mkpart primary 1 1G
mkpart primary 1G 100%

inside parted set partition 1 as bootable:

set 1 boot on
set 1 bios_grub on
quit

format partitions with filesystems:

mkfs.fat -F32 /dev/nvme0n1p1
mkfs.ext4 /dev/nmve0n1p2

now create temporary directory to mount this partitions:

mkdir /mnt/archlinux
mount /dev/nmve0n1p2 /mnt/archlinux
mkdir /mnt/archlinux/boot
mount /dev/nvme0n1p1 /mnt/archlinux/boot

now we copy all content from old disk to the new one mount at /mnt/archlinux using rsync:

rsync -av /* /mnt/archlinux --exclude /sys --exclude /proc --exclude /media --exclude /mnt/archlinux

when rsync finish, use arch-chroot to enter the new drive environment:

arch-chroot /mnt/archlinux

identify new boot and root partitions UUID:

blkid|grep -e /dev/nvme0n1p1 -e /dev/nvme0n1p2

update /etc/fstab and change the UUID for your boot and root partitions:

UUID=F9D0-C830                             /boot vfat  defaults 1 2
UUID=80cc0cfd-a13f-47a2-9150-90cf8773662c  /     ext4  defaults 0 2

create the following directories:

mkdir /sys /proc /media

we need to install grub on new drive:

grub-install --target=x86_64-efi --efi-directory=/boot --bootloader-id=ARCH_DESKTOP /dev/nvme0n1

now create grub configuration:

grub-mkconfig -o /boot/grub/grub.cfg

exit chroot:

exit

umount partition mounted on /mnt/archlinux:

umount /mnt/archlinux/boot
umount /mnt/archlinux

reboot the system:

reboot