Howto HiveOS

commands

show hive client agent:

agent-screen

ask for rig id and password again:

firstrun -f 

run file manager:

mc

upgrade from console, same as hitting a button on the web:

selfupgrade 

do a hard reboot:

sreboot

do a hard shutdown:

sreboot shutdown

show running miner screen:

miner 

start currently configured miner:

miner start

stop currently configured miner:

miner stop 

show miner log:

miner log

show miner configuration:

miner config

how boot system messages:

dmesg

show last 100 lines from system log:

tail -n 100 /var/log/syslog

show network interfaces:

ifconfig

show wireless adapters

iwconfig

stop any running command:

ctrl+c 

detach from screen (miner or agent) to leave it working:

ctrl+a, d 

switch between screens if you have second miner running and so on:

ctrl+a, space or ctrl+a, 1,2,3

show logs of various parts (you can try log1 and log2) of the Hive agent

agent-screen log 

say hello to server: to refresh IP addresses, configs etc:

hello 

check and diagnose your network connection:

net-test

show time and date synchronization settings:

timedatectl

show list of all processes:

top -b -n 1 

show hashrate watchdog status and log:

wd status

spin gpu fans from the first card to the last to make it easier to find the required gpu:

gpu-fans-find

show voltage/temperature readings of the motherboard and cpu:

sensors

shutdown psu and boot in 120 seconds:

sreboot wakealarm 120

send a power command to OpenDev watchdog:

/hive/opt/opendev/watchdog-opendev power

send a reset command to OpenDev watchdog:

/hive/opt/opendev/watchdog-opendev reset

expand a linux partition to fill remaining drive space: disk-expand -s list all installed miners:

hpkg list miners

uninstall all miners:

hpkg remove miners 

it can help in situations when selfupgrade says hiveos is up to date but actually it isn’t:

selfupgrade --force

show Hive service boot log:

journalctl -u hive --no-pager

show log of xorg server:

journalctl -u hivex --no-pager

write all logs to disk, they will remain after reboots:

logs-on

write all logs to RAM to reduсe USB flash drive wear:

logs-off

send /var/log/syslog file to dashboard:

log='/var/log/syslog'; gzip -c9 "$log" | base64 -w 0 | message file "$(basename "$log")" payload

amd gpu

show amd cards info:

amd-info

show info about amd cards power supply:

amdcovc

show amd cards memory info:

amdmeminfo

show voltage table for AMD GPU 0:

wolfamdctrl -i 0 --show-voltage

nvidia gpu

show recent nvidia gpu errors:

journalctl -p err | grep NVRM

show extended nvidia cards info

nvidia-info

update nvidia drivers:

nvidia-driver-update

download and install latest driver from series 430:

nvidia-driver-update 430

reinstall nvidia-settings only:

nvidia-driver-update --nvs

remove all downloaded nvidia driver packages except currently installed:

nvidia-driver-update --remove 

show nvidia cards info:

nvidia-smi 

show core/mem clocks for all the nvidia gpus:

nvtool --clocks

references

• https://download.hiveos.farm/drivers
• https://hiveon.com/guides-driver_upd
• https://hiveon.com/guides-linux
• https://github.com/lg/hiveos-docker