Howto openstack kolla: Difference between revisions
Mandulete1 (talk | contribs) |
Mandulete1 (talk | contribs) |
||
| Line 84: | Line 84: | ||
enter debian node environment using chroot: | enter debian node environment using chroot: | ||
chroot /mnt/cloudimg | chroot /mnt/cloudimg | ||
inside debian environment load the following profile: | |||
source /etc/profile | |||
add this parameters to grub configuration /etc/default/grub: | add this parameters to grub configuration /etc/default/grub: | ||
GRUB_CMDLINE_LINUX="biosdevname=0 net.ifnames=0" | GRUB_CMDLINE_LINUX="biosdevname=0 net.ifnames=0" | ||
Revision as of 23:59, 23 May 2023
setup host
enable nested kvm edit /etc/modprobe.d/kvm.conf:
# For Intel options kvm_intel nested=1 # # For AMD #options kvm_amd nested=1
if using rhel9 as host install the following repo:
dnf copr enable ligenix/enterprise-qemu-spice
then install libvirt and qemu-kvm:
yum install -y libvirt qemu-kvm guestfs-tools nbd
enable and start libvirtd daemon:
systemctl enable libvirtd && systemctl start libvirtd
create the following directory under /var/lib/libvirt/images:
mkdir /var/lib/libvirt/images/openstack cd /var/lib/libvirt/images/openstack
download debian bullseye:
wget https://cloud.debian.org/images/cloud/bullseye/latest/debian-11-generic-amd64.qcow2
for baremetal download the iso:
http://mirrors.ocf.berkeley.edu/debian-cd/11.7.0/amd64/iso-cd/debian-11.7.0-amd64-netinst.iso
resize cloud image:
cp debian-11-generic-amd64.qcow2 debian-11-generic-amd64_100G.qcow2 qemu-img resize debian-11-generic-amd64_100G.qcow2 +98G
set root password for image:
virt-sysprep -a debian-11-generic-amd64_100G.qcow2 -q --root-password password:livinglavidalinux
create storage images for openstack nodes:
cp debian-11-generic-amd64_100G.qcow2 openstack-node1.qcow2 cp debian-11-generic-amd64_100G.qcow2 openstack-node2.qcow2 cp debian-11-generic-amd64_100G.qcow2 openstack-node3.qcow2 cp debian-11-generic-amd64_100G.qcow2 openstack-node4.qcow2 cp debian-11-generic-amd64_100G.qcow2 openstack-node5.qcow2 cp debian-11-generic-amd64_100G.qcow2 openstack-dns.qcow2
create storage images for ceph cluster:
qemu-img create -f qcow2 ceph_storage_server1_1.img 100G qemu-img create -f qcow2 ceph_storage_server1_2.img 100G qemu-img create -f qcow2 ceph_storage_server1_3.img 100G qemu-img create -f qcow2 ceph_storage_server1_4.img 100G qemu-img create -f qcow2 ceph_storage_server2_1.img 100G qemu-img create -f qcow2 ceph_storage_server2_2.img 100G qemu-img create -f qcow2 ceph_storage_server2_3.img 100G qemu-img create -f qcow2 ceph_storage_server2_4.img 100G qemu-img create -f qcow2 ceph_storage_server3_1.img 100G qemu-img create -f qcow2 ceph_storage_server3_2.img 100G qemu-img create -f qcow2 ceph_storage_server3_3.img 100G qemu-img create -f qcow2 ceph_storage_server3_4.img 100G
download virtual machines xml:
wget https://img.vidalinux.com/files/openstack/XML/openstack-node1-debian10-2023-05-16.xml wget https://img.vidalinux.com/files/openstack/XML/openstack-node2-debian10-2023-05-16.xml wget https://img.vidalinux.com/files/openstack/XML/openstack-node3-debian10-2023-05-16.xml wget https://img.vidalinux.com/files/openstack/XML/openstack-node4-debian10-2023-05-16.xml wget https://img.vidalinux.com/files/openstack/XML/openstack-node5-debian10-2023-05-16.xml wget https://img.vidalinux.com/files/openstack/XML/openstack-dns-debian10-2023-05-16.xml
import virtual machines:
virsh define openstack-node1-debian10-2023-05-16.xml virsh define openstack-node2-debian10-2023-05-16.xml virsh define openstack-node3-debian10-2023-05-16.xml virsh define openstack-node4-debian10-2023-05-16.xml virsh define openstack-node5-debian10-2023-05-16.xml virsh define openstack-dns-debian10-2023-05-16.xml
download virtual networks xml:
wget https://img.vidalinux.com/files/openstack/XML/oscpiso-net-2023-05-16.xml wget https://img.vidalinux.com/files/openstack/XML/publiciso-net-2023-05-16.xml
import virtual networks:
virsh net-define oscpiso-net-2023-05-16.xml virsh net-define publiciso-net-2023-05-16.xml
start virtual networks:
virsh net-start oscpiso virsh net-start publiciso
download iptables rules:
wget https://img.vidalinux.com/files/openstack/iptables-default-isolate-libvirt-openstack.sh
fix permissions and execute script:
chmod +x iptables-default-isolate-libvirt-openstack.sh ./iptables-default-isolate-libvirt-openstack.sh
configure dns node
mount cloud image to pre-configure network:
modprobe nbd qemu-nbd -c /dev/nbd0 openstack-dns.qcow2 kpartx -a /dev/nbd0 mkdir /mnt/cloudimg mount /dev/mapper/nbd0p1 /mnt/cloudimg mount -o bind /dev /mnt/cloudimg/dev mount -o bind /proc /mnt/cloudimg/proc
enter debian node environment using chroot:
chroot /mnt/cloudimg
inside debian environment load the following profile:
source /etc/profile
add this parameters to grub configuration /etc/default/grub:
GRUB_CMDLINE_LINUX="biosdevname=0 net.ifnames=0"
update grub configuration:
update-grub
configure network on node1:
cat > /etc/network/interfaces << EOF auto lo eth0 eth1 eth2 eth3 iface lo inet loopback # eth0 iface eth0 inet manual up ip link set dev eth0 up down ip link set dev eth0 down # eth1 iface eth1 inet static address 192.168.88.64/24 gateway 192.168.88.1 dns-nameservers 4.2.2.1 dns-nameservers 4.2.2.2 # eth2 iface eth2 inet static address 10.10.88.64/24 # eth3 iface eth3 inet manual up ip link set dev eth3 up down ip link set dev eth3 down EOF
setup ssh-server configuration:
dpkg-reconfigure openssh-server
change sshd config to allow root user and password connection:
sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
exit chroot:
exit
umount image when finish configuration:
umount /mnt/cloudimg/proc umount /mnt/cloudimg/dev umount /mnt/cloudimg nbd-client -d /dev/nbd0 dmsetup remove /dev/mapper/nbd0p1 dmsetup remove /dev/mapper/nbd0p14 dmsetup remove /dev/mapper/nbd0p15
start node1 virtual machine:
virsh start openstack-dns-debian10
connect to node1 using ssh:
ssh root@192.168.88.64
set hostname:
hostnamectl set-hostname oscpdns
set timezone:
timedatectl set-timezone America/Puerto_Rico
install dnsmasq:
apt-get update apt-get install dnsmasq -y
configure dnsmasq:
cat > /etc/dnsmasq.conf << EOF listen-address=127.0.0.1,192.168.88.64 interface=eth1 expand-hosts domain=ovox.io server=4.2.2.1 server=4.2.2.2 address=/oscpnode1/10.10.88.58 address=/oscpnode2/10.10.88.57 address=/oscpnode3/10.10.88.56 address=/oscpnode4/10.10.88.55 address=/oscpnode5/10.10.88.54 address=/oscpdns/10.10.88.64 address=/openstack-int/10.10.88.244 address=/openstack/192.168.88.244 EOF
configure /etc/hosts:
cat > /etc/hosts << EOF 127.0.0.1 localhost 192.168.88.58 oscpnode1 192.168.88.57 oscpnode2 192.168.88.56 oscpnode3 192.168.88.55 oscpnode4 192.168.88.54 oscpnode5 192.168.88.64 oscpdns registry 192.168.88.244 openstack 10.10.88.244 openstack-int EOF
enable and restart dnsmasq:
systemctl enable dnsmasq systemctl restart dnsmasq
local registry
install podman packages:
apt-get -y install podman
install pip:
apt-get -y install pip
install podman-compose:
pip3 install --user 'podman-compose<1.0'
fix permissions and symlink:
chmod +x /usr/local/lib/python3.9/dist-packages/podman_compose.py ln -s /usr/local/lib/python3.9/dist-packages/podman_compose.py /usr/bin/podman-compose
add the following registries to /etc/containers/registries.conf
cat >> /etc/containers/registries.conf << "EOF" [registries.search] registries = ['docker.io', 'registry.fedoraproject.org', 'quay.io', 'registry.access.redhat.com', 'registry.centos.org'] EOF
create registry directory:
mkdir ~/podman-registry cd ~/podman-registry
create self sign certificates:
mkdir ~/podman-registry/certs openssl genrsa -out ~/podman-registry/certs/server.key 4096 openssl req -new -x509 -text -key ~/podman-registry/certs/server.key -out ~/podman-registry/certs/server.cert
compose file to create registry:
cat > podman-compose.yml << EOF
version: '3'
services:
registry:
restart: always
image: registry:2
container_name: registry
ports:
- "5000:5000"
environment:
REGISTRY_AUTH: htpasswd
REGISTRY_AUTH_HTPASSWD_REALM: Registry
REGISTRY_AUTH_HTPASSWD_PATH: /auth/htpasswd
REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY: /data
REGISTRY_HTTP_TLS_CERTIFICATE: /certs/server.cert
REGISTRY_HTTP_TLS_KEY: /certs/server.key
TZ: America/Puerto_Rico
volumes:
- ~/podman-registry/auth:/auth
- ~/podman-registry/data:/data
- ~/podman-registry/certs:/certs
EOF
create password file:
mkdir ~/podman-registry/auth podman run --rm --entrypoint htpasswd httpd:2 -Bbn registry livinglavidalinux > ~/podman-registry/auth/htpasswd
run the registry by executing:
podman-compose up -d
as root user edit /etc/containers/registries.conf:
cat >> /etc/containers/registries.conf << "EOF" [registries.insecure] registries = ['registry.ovox.io'] EOF
log in to a private registry:
podman login registry.ovox.io:5000 -u registry -p livinglavidalinux
configure node1
mount cloud image to pre-configure network:
qemu-nbd -c /dev/nbd0 openstack-node1.qcow2 kpartx -a /dev/nbd0 mount /dev/mapper/nbd0p1 /mnt/cloudimg mount -o bind /dev /mnt/cloudimg/dev mount -o bind /proc /mnt/cloudimg/proc
enter debian node environment using chroot:
chroot /mnt/cloudimg
inside debian environment load the following profile:
source /etc/profile
add this parameters to grub configuration /etc/default/grub:
GRUB_CMDLINE_LINUX="biosdevname=0 net.ifnames=0"
update grub configuration:
update-grub
configure network on node1:
cat > /etc/network/interfaces << EOF auto lo eth0 eth1 eth2 eth3 iface lo inet loopback # eth0 iface eth0 inet manual up ip link set dev eth0 up down ip link set dev eth0 down # eth1 iface eth1 inet static address 192.168.88.58/24 gateway 192.168.88.1 dns-nameservers 192.168.88.64 # eth2 iface eth2 inet static address 10.10.88.58/24 # eth3 iface eth3 inet manual up ip link set dev eth3 up down ip link set dev eth3 down EOF
setup ssh-server configuration:
dpkg-reconfigure openssh-server
change sshd config to allow root user and password connection:
sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
exit chroot:
exit
umount image when finish configuration:
umount /mnt/cloudimg/proc umount /mnt/cloudimg/dev umount /mnt/cloudimg nbd-client -d /dev/nbd0 dmsetup remove /dev/mapper/nbd0p1 dmsetup remove /dev/mapper/nbd0p14 dmsetup remove /dev/mapper/nbd0p15
start node1 virtual machine:
virsh start openstack-node1-debian10
connect to node1 using ssh:
ssh root@192.168.88.58
set hostname:
hostnamectl set-hostname oscpnode1
set timezone:
timedatectl set-timezone America/Puerto_Rico
configure node2
mount cloud image to pre-configure network:
qemu-nbd -c /dev/nbd0 openstack-node2.qcow2 kpartx -a /dev/nbd0 mount /dev/mapper/nbd0p1 /mnt/cloudimg mount -o bind /dev /mnt/cloudimg/dev mount -o bind /proc /mnt/cloudimg/proc
enter debian node environment using chroot:
chroot /mnt/cloudimg && source /etc/profile
add this parameters to grub configuration /etc/default/grub:
GRUB_CMDLINE_LINUX="biosdevname=0 net.ifnames=0"
update grub configuration:
update-grub
configure network on node1:
cat > /etc/network/interfaces << EOF auto lo eth0 eth1 eth2 eth3 iface lo inet loopback # eth0 iface eth0 inet manual up ip link set dev eth0 up down ip link set dev eth0 down # eth1 iface eth1 inet static address 192.168.88.57/24 gateway 192.168.88.1 dns-nameservers 192.168.88.64 # eth2 iface eth2 inet static address 10.10.88.57/24 # eth3 iface eth3 inet manual up ip link set dev eth3 up down ip link set dev eth3 down EOF
setup ssh-server configuration:
dpkg-reconfigure openssh-server
change sshd config to allow root user and password connection:
sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
exit chroot:
exit
umount image when finish configuration:
umount /mnt/cloudimg/proc umount /mnt/cloudimg/dev umount /mnt/cloudimg nbd-client -d /dev/nbd0 dmsetup remove /dev/mapper/nbd0p1 dmsetup remove /dev/mapper/nbd0p14 dmsetup remove /dev/mapper/nbd0p15
start node1 virtual machine:
virsh start openstack-node2-debian10
connect to node1 using ssh:
ssh root@192.168.88.57
set hostname:
hostnamectl set-hostname oscpnode2
set timezone:
timedatectl set-timezone America/Puerto_Rico
configure node3
mount cloud image to pre-configure network:
qemu-nbd -c /dev/nbd0 openstack-node3.qcow2 kpartx -a /dev/nbd0 mount /dev/mapper/nbd0p1 /mnt/cloudimg mount -o bind /dev /mnt/cloudimg/dev mount -o bind /proc /mnt/cloudimg/proc
enter debian node environment using chroot:
chroot /mnt/cloudimg && source /etc/profile
add this parameters to grub configuration /etc/default/grub:
GRUB_CMDLINE_LINUX="biosdevname=0 net.ifnames=0"
update grub configuration:
update-grub
configure network on node1:
cat > /etc/network/interfaces << EOF auto lo eth0 eth1 eth2 eth3 iface lo inet loopback # eth0 iface eth0 inet manual up ip link set dev eth0 up down ip link set dev eth0 down # eth1 iface eth1 inet static address 192.168.88.56/24 gateway 192.168.88.1 dns-nameservers 192.168.88.64 # eth2 iface eth2 inet static address 10.10.88.56/24 # eth3 iface eth3 inet manual up ip link set dev eth3 up down ip link set dev eth3 down EOF
setup ssh-server configuration:
dpkg-reconfigure openssh-server
change sshd config to allow root user and password connection:
sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
exit chroot:
exit
umount image when finish configuration:
umount /mnt/cloudimg/proc umount /mnt/cloudimg/dev umount /mnt/cloudimg nbd-client -d /dev/nbd0 dmsetup remove /dev/mapper/nbd0p1 dmsetup remove /dev/mapper/nbd0p14 dmsetup remove /dev/mapper/nbd0p15
start node1 virtual machine:
virsh start openstack-node3-debian10
connect to node1 using ssh:
ssh root@192.168.88.56
set hostname:
hostnamectl set-hostname oscpnode3
set timezone:
timedatectl set-timezone America/Puerto_Rico
configure node4
mount cloud image to pre-configure network:
qemu-nbd -c /dev/nbd0 openstack-node4.qcow2 kpartx -a /dev/nbd0 mount /dev/mapper/nbd0p1 /mnt/cloudimg mount -o bind /dev /mnt/cloudimg/dev mount -o bind /proc /mnt/cloudimg/proc
enter debian node environment using chroot:
chroot /mnt/cloudimg && source /etc/profile
add this parameters to grub configuration /etc/default/grub:
GRUB_CMDLINE_LINUX="biosdevname=0 net.ifnames=0"
update grub configuration:
update-grub
configure network on node1:
cat > /etc/network/interfaces << EOF auto lo eth0 eth1 eth2 eth3 iface lo inet loopback # eth0 iface eth0 inet manual up ip link set dev eth0 up down ip link set dev eth0 down # eth1 iface eth1 inet static address 192.168.88.55/24 gateway 192.168.88.1 dns-nameservers 192.168.88.64 # eth2 iface eth2 inet static address 10.10.88.55/24 # eth3 iface eth3 inet manual up ip link set dev eth3 up down ip link set dev eth3 down EOF
setup ssh-server configuration:
dpkg-reconfigure openssh-server
change sshd config to allow root user and password connection:
sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
exit chroot:
exit
umount image when finish configuration:
umount /mnt/cloudimg/proc umount /mnt/cloudimg/dev umount /mnt/cloudimg nbd-client -d /dev/nbd0 dmsetup remove /dev/mapper/nbd0p1 dmsetup remove /dev/mapper/nbd0p14 dmsetup remove /dev/mapper/nbd0p15
start node1 virtual machine:
virsh start openstack-node4-debian10
connect to node1 using ssh:
ssh root@192.168.88.55
set hostname:
hostnamectl set-hostname oscpnode4
set timezone:
timedatectl set-timezone America/Puerto_Rico
configure node5
mount cloud image to pre-configure network:
qemu-nbd -c /dev/nbd0 openstack-node5.qcow2 kpartx -a /dev/nbd0 mount /dev/mapper/nbd0p1 /mnt/cloudimg mount -o bind /dev /mnt/cloudimg/dev mount -o bind /proc /mnt/cloudimg/proc
enter debian node environment using chroot:
chroot /mnt/cloudimg && source /etc/profile
add this parameters to grub configuration /etc/default/grub:
GRUB_CMDLINE_LINUX="biosdevname=0 net.ifnames=0"
update grub configuration:
update-grub
configure network on node1:
cat > /etc/network/interfaces << EOF auto lo eth0 eth1 eth2 eth3 iface lo inet loopback # eth0 iface eth0 inet manual up ip link set dev eth0 up down ip link set dev eth0 down # eth1 iface eth1 inet static address 192.168.88.54/24 gateway 192.168.88.1 dns-nameservers 192.168.88.64 # eth2 iface eth2 inet static address 10.10.88.54/24 # eth3 iface eth3 inet manual up ip link set dev eth3 up down ip link set dev eth3 down EOF
setup ssh-server configuration:
dpkg-reconfigure openssh-server
change sshd config to allow root user and password connection:
sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
exit chroot:
exit
umount image when finish configuration:
umount /mnt/cloudimg/proc umount /mnt/cloudimg/dev umount /mnt/cloudimg nbd-client -d /dev/nbd0 dmsetup remove /dev/mapper/nbd0p1 dmsetup remove /dev/mapper/nbd0p14 dmsetup remove /dev/mapper/nbd0p15
start node1 virtual machine:
virsh start openstack-node5-debian10
connect to node1 using ssh:
ssh root@192.168.88.54
set hostname:
hostnamectl set-hostname oscpnode5
set timezone:
timedatectl set-timezone America/Puerto_Rico
configure kolla-ansible
copy and pasted the following on your shell:
cat > /usr/local/bin/openstack << "EOF"
#!/bin/bash
VMS="openstack-node1-debian10
openstack-node2-debian10
openstack-node3-debian10
openstack-node4-debian10
openstack-node5-debian10
openstack-dns-debian10"
if [ $1 = start ];
then
for u in ${VMS}; do virsh start $u; done
fi
if [ $1 = destroy ];
then
for u in ${VMS}; do virsh destroy $u; done
fi
EOF
if [ $1 = shutdown ];
then
for u in ${VMS}; do virsh shutdown $u; done
fi
EOF
fix permissions:
chmod +x /usr/local/bin/openstack
start virtual machines using the script:
openstack start
connect to node1:
ssh root@192.168.88.58
download ovoxcloud-kolla script:
wget https://img.vidalinux.com/files/openstack/ovoxcloud-kolla-2023-05-22 -O ./ovoxcloud-kolla
set file permissions:
chmod +x ovoxcloud-kolla
run initial-setup:
./ovoxcloud-kolla initial-setup
edit ovoxcloud-kolla and change the following, make sure set exact year-month-day on BUILD:
BUILD=debian-zed-2023-05-23 REGISTRY="registry.ovox.io" REGISTRY_PORT="5000" REGISTRY_USER="registry" REGISTRY_PASS="livinglavidalinux"
edit ansible host file /root/debian-zed-2023-05-19/multinode
[control] oscpnode1 oscpnode2 oscpnode3 [network] oscpnode1 oscpnode2 oscpnode3 [compute] oscpnode4 oscpnode5 [monitoring] oscpnode1 oscpnode2 oscpnode3 [storage] oscpnode1 oscpnode2 oscpnode3
copy ssh key to hosts:
./ovoxcloud-kolla copy-ssh-key
test ssh connection to nodes:
./ovoxcloud-kolla ping
deploy ceph cluster:
./ovoxcloud-kolla ceph-deploy
create ceph pools for openstack:
./ovoxcloud-kolla ceph-pool-openstack
configure ceph for openstack:
./ovoxcloud-kolla ceph-openstack
build openstack docker images:
./ovoxcloud-kolla build-images
push images to local registry:
./ovoxcloud-kolla push-images
fix docker-registry repository name:
ssh root@oscpdns cd /root/podman-registry/data/docker/registry/v2/repositories ln -s kolla openstack.kolla
use genuine ssl certificate:
mkdir /root/certificates
use the following script to merge root certificates and then copy to kolla config:
cat > /root/certificates/merge << EOF TMPDIR=/tmp OS_TYPE=$(cat /etc/os-release*|grep ^ID=|sed 's|"||g'|cut -d '=' -f2) KOLLADIR=/etc/kolla/certificates CERTDIR=/root/certificates DOMAIN=ovox.io CRT_NAME=$DOMAIN.crt KEY_NAME=$DOMAIN.key ROOT_CA=root.ca GLOBAL_CA=global.pem if [ -d $KOLLADIR ]; then echo "directory exist" else echo "directory doesn't exist creating.." mkdir $KOLLADIR fi if [ $OS_TYPE = centos ]; then cat $CERTDIR/$GLOBAL_CA $CERTDIR/$ROOT_CA > $TMPDIR/ca.pem cat $CERTDIR/$KEY_NAME $CERTDIR/$CRT_NAME > $TMPDIR/haproxy.pem cat $TMPDIR/haproxy.pem $TMPDIR/ca.pem > $KOLLADIR/haproxy.pem if [ ! -f $KOLLADIR/haproxy-ca.crt ]; then ln -s $KOLLADIR/haproxy.pem $KOLLADIR/haproxy-ca.crt fi fi if [ $OS_TYPE = debian ]; then cat $CERTDIR/$KEY_NAME $CERTDIR/$CRT_NAME > $KOLLADIR/haproxy.pem if [ ! -f $KOLLADIR/haproxy-ca.crt ]; then ln -s $KOLLADIR/haproxy.pem $KOLLADIR/haproxy-ca.crt fi fi EOF
fix permissions and execute the script:
chmod +x /root/certificates/merge /root/certificates/merge
change docker registry certificates:
scp -r /root/certificates root@oscpdns ssh root@oscpdns cd ~/podman-registry podman-compose down cp ~/certificates/ovox.io* ~/podman-registry/certs/
change the podman-compose.yml
REGISTRY_HTTP_TLS_CERTIFICATE: /certs/ovox.io.crt REGISTRY_HTTP_TLS_KEY: /certs/ovox.io.key
start podman container:
cd ~/podman-registry podman-compose up -d
trust this geniune ssl cert on nodes:
./ovoxcloud-kolla trust-cert-docker
deploy openstack cluster:
./ovoxcloud-kolla openstack-deploy
run post deploy openstack:
./ovoxcloud-kolla openstack-post-deploy
openstack operation
create the following script to upload images to glance:
cat > /usr/local/bin/upload-image << "EOF"
#!/bin/bash
if [ $# -eq 0 ]
then
echo "usage:"
echo "upload-image /home/pedro/bionic-server-cloudimg-amd64.img ubuntu-20.04-x86_64"
echo ""; exit
fi
if [ ! -f $1 ];
then
echo "file doesn't exist please try again.." && exit 1
fi
if [ -z "$2" ];
then
echo "please specify name for image" && exit 1
fi
source /root/admin-openrc.sh
glance image-create --name="$2" --visibility public --disk-format raw --container-format bare --progress --file $1
exit 0
EOF
fix script permissions:
chmod +x /usr/local/bin/upload-image
download cirros image:
wget https://github.com/cirros-dev/cirros/releases/download/0.6.1/cirros-0.6.1-x86_64-disk.img
convert image from qcow2 to raw:
qemu-img convert -f qcow2 -O raw -p cirros-0.6.1-x86_64-disk.img cirros-0.6.1-x86_64-disk.raw
upload image to glance using script:
upload-image /root/cirros-0.6.1-x86_64-disk.raw cirros-0.6.1-x86_64
create the following script for creating flavors:
cat > /usr/local/bin/openstack-create-flavors << EOF #!/bin/bash openstack flavor create --id 1 --ram 1024 --swap 512 --disk 1 --vcpus 1 ovox.tiny openstack flavor create --id 2 --ram 2048 --swap 1024 --disk 10 --vcpus 1 ovox.small openstack flavor create --id 3 --ram 4096 --swap 2048 --disk 50 --vcpus 2 ovox.medium openstack flavor create --id 4 --ram 8192 --swap 4096 --disk 100 --vcpus 4 ovox.large openstack flavor create --id 5 --ram 16384 --swap 8192 --disk 200 --vcpus 8 ovox.xlarge openstack flavor create --id 8 --ram 4096 --disk 35 --vcpus 2 windows.small openstack flavor create --id 9 --ram 8192 --disk 50 --vcpus 2 windows.medium EOF
fix script permissions:
chmod +x /usr/local/bin/openstack-create-flavors
create openstack flavors using script:
openstack-create-flavors