Howto install artixlinux aarch64

download image

create temp directory:

mkdir artixlinux && cd artixlinux

download raspios image:

wget https://downloads.raspberrypi.org/raspios_arm64/images/raspios_arm64-2023-12-06/2023-12-05-raspios-bookworm-arm64.img.xz

download image:

wget https://armtixlinux.org/images/armtix-openrc-20240730.tar.xz

decompress raspios image:

xz -d 2023-12-05-raspios-bookworm-arm64.img.xz

change raspios image name:

mv 2023-12-05-raspios-bookworm-arm64.img $(date +%F)-artixlinux-aarch64.img

chroot with qemu

install qemu-user-static to interpret the arm instructions in the chroot:

pacman -Sy qemu-user-static --noconfirm

install multipath-tools in archlinux:

pacman -S multipath-tools --noconfirm

if you use debian you can install this packages:

apt install kpartx qemu-user-static 

script to mount and umount raspberrypi image:

curl -ko ./raspimg https://raw.githubusercontent.com/vidalinux/raspi/main/raspimg 
chmod +x ./raspimg

mount image to /mnt/temp without binding directories:

./raspimg mount $(date +%F)-artixlinux-aarch64.img
do you want to bind /dev /proc /sys /pkg directories now : no

remove image contents from:

rm -rf /mnt/temp/*

decompress archlinux arm file to /mnt/temp:

tar xvf armtix-openrc-20240730.tar.xz -C /mnt/temp

copy the qemu-aarch64-static binary to the chroot:

cp /usr/bin/qemu-aarch64-static /mnt/temp/usr/bin/

register the qemu-aarch64-static as an arm interpreter in the kernel:

curl -ko /usr/local/bin/binfmt_manager https://raw.githubusercontent.com/mikkeloscar/binfmt-manager/master/binfmt_manager
chmod +x /usr/local/bin/binfmt_manager
binfmt_manager register aarch64

umount image:

./raspimg umount $(date +%F)-artixlinux-aarch64.img

mount it again binding /dev /proc /sys and pkg directories:

./raspimg mount $(date +%F)-artixlinux-aarch64.img
do you want to bind /dev /proc /sys /pkg directories now : yes

enter chroot using arch-chroot:

chroot /mnt/temp

configure image

initialize pacman:

pacman-key --init
pacman-key --populate

configure dns:

cat > /etc/resolv.conf << EOF
nameserver 4.2.2.1
nameserver 4.2.2.2
EOF

update all system:

pacman -Syuu --noconfirm

install the following packages:

pacman -Sy base-devel libnewt git wget rsync networkmanager parted multipath-tools lsof git sudo fakeroot screen inetutils networkmanager-openrc wpa_supplicant-openrc --noconfirm

install expand-sd:

curl -ko /usr/local/bin/expand-sd https://raw.githubusercontent.com/vidalinux/raspi/main/expand-sd
chmod +x /usr/local/bin/expand-sd

remove armtix line from /etc/sudoers:

sed -i '/armtix/d' /etc/sudoers

set password to armtix user:

passwd armtix
echo "armtix ALL=(ALL:ALL) ALL" > /etc/sudoers.d/armtix

configure fstab:

cat > /etc/fstab << EOF
/dev/mmcblk0p1  /boot   vfat    defaults        0       0
/dev/mmcblk0p2  /       ext4    defaults        0       0
EOF

change root password:

passwd root

install kernel with aarch64:

wget http://mirror.archlinuxarm.org/aarch64/core/linux-rpi-6.6.42-1-aarch64.pkg.tar.xz
wget http://mirror.archlinuxarm.org/aarch64/alarm/firmware-raspberrypi-20231022-1-any.pkg.tar.xz
wget http://mirror.archlinuxarm.org/aarch64/alarm/raspberrypi-bootloader-20240726-1-any.pkg.tar.xz
pacman -U firmware-raspberrypi-20231022-1-any.pkg.tar.xz raspberrypi-bootloader-20240726-1-any.pkg.tar.xz linux-rpi-6.6.42-1-aarch64.pkg.tar.xz

start and enable services:

rc-update add NetworkManager default
rc-update add wpa_supplicant default

umount image:

./raspimg umount $(date +%F)-artixlinux-aarch64.img

connect sdcard to your computer then identify drive letter:

dmesg|tail|grep sd

copy image to sdcard:

dd if=$(date +%F)-artixlinux-aarch64.img of=/dev/sdd status=progress

boot with image and run the following command to update date and time:

ntpd -qg

references

• https://wiki.gentoo.org/wiki/OpenRC_to_systemd_Cheatsheet